Specifications
- 2012
Directional
pattern
Cardioid
Principle
of operation
Pressure
gradient
Cartridge
type
Pre-polarized
condenser
Frequency
response
20 Hz - 20
kHz
Effective
frequency range, ±2 dB, at 30 cm (11.8 in)
40 Hz to 20
kHz
Sensitivity,
nominal, ±2 dB at 1 kHz
8 mV/Pa;
-42 dB re. 1 V/Pa
Equivalent
noise level, A-weighted
Typ. 20
dB(A) re 20 µPa (max. 22 dB(A))
Distortion,
THD < 1%
148 dB SPL
(151 dB SPL peak)
Dynamic
range
Typ. 131 dB
Max.
SPL, THD 10%
153 dB SPL
(156 dB SPL peak)
Switchable
attenuator, filters etc.
-
Rated
output impedance
60 Ω
Minimum
load impedance
2 kΩ
Cable
drive capability
100 m (328
ft)
Output
balance principle
Impedance
balancing with Active Drive
Common
mode rejection ratio (CMRR)
> 60 dB
Power
supply (for full performance)
P48
(Phantom Power)
Current
consumption
0.7 mA
Connector
XLR-3M. Pin
1: shield, Pin 2: signal + phase, Pin 3: - phase
Color
Matte black
Weight
83 g (2.9
oz)
Microphone
diameter
19 mm (0.75
in)
Capsule
diameter
17 mm (0.67
in)
Microphone
length
94 mm (3.7
in)
Maximum
output voltage, RMS
8.7 V (21
dBu)
Polarity
+V at pin 2
for positive sound pressure
Temperature
range
-40°C to
45°C (-40°F to 113°F)
Relative
humidity (RH)
Up to 90%
Sensitivity
selection tolerance (at 1 kHz)
±1.5 dB